clcInfo_ArmsWarrior

Main / Sample Configuration

clcInfo requires substantial configuration on your part. This can be intimidating for some, so provided here is a step by step that will give you a setup that looks like this in only, uh... 65 steps:

Sample Configuration

NOTE: Once your layout is set up, you can actually drag it and its elements around. If you type /clcinfo and click on the top item on the left, "Active: (Name of Template)" you'll see an "Unlock Elements" button on the right. Click it, then drag your elements around. Then click "Lock Elements" to lock them.

ALSO NOTE: When entering numeric values, hit "Enter" to store them. Otherwise, they do not get updated.

And now, the steps:

Setting up your Arms Template

  • 1. Type /clcinfo
  • 2. On the left hand side choose Template 1 if you have no templates. Otherwise click on Templates and click Add Template.
  • 3. Make sure the "Spec" tab is selected.
  • 4. For label type "Warrior Arms PvE" and click "OK"
  • 5. Set Primary Tree to "Arms"
  • 6. For Distinctive Talent set Tree to "Arms", Talent to "Bladestorm", and rank to "1". You might want to pick a different talent and rank that will differentiate your pve clcinfo from your pvp one if you ever decide to use a PvP clcInfo module for Arms Warriors.

Make the Grid

  • 7. On the left under Active: Warrior Arms PvE select Grids.
  • 8. Click on Add Grid
  • 9. Select Grid1 on the left.
  • 10. Select the Layout tab.
  • 11. Set Columns to "18" and Rows to "6".
  • 12. Set the Horizontal and Vertical spacing to "0".
  • 13. Set Cell Width and Height to "10".
  • 14. Set Position X to "-7" and Position Y to "-109". You can change these settings to suit your UI.
  • 15. Click on the "General" tab.
  • 16. For Label type "Warrior - Arms" and hit "Okay".

Make Icons

  • 17. Click "Add Icon" 6 (six) times. This will make 6 icons.

Current Ability

  • 18. On the left click on the + next to Icons. Select Icon1. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 19. Select the Behavior tab.
  • 20. Under Categories select "Warrior | Arms"
  • 21. Under Templates select "Arms Rotation Current Ability"
  • 22. Click on the General Tab.
  • 23. Set Label to "Current Ability" and hit "Okay".
  • 24. Click on the Grid tab.
  • 25. Set Column to "8", Row to "1", and Width and Height to "6"

Next Ability

  • 26. On the left select Icon2. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 27. Select the Behavior tab.
  • 28. Under Categories select "Warrior | Arms"
  • 29. Under Templates select "Arms Rotation Next Ability"
  • 30. Click on the General Tab.
  • 31. Set Label to "Next Ability" and hit "Okay".
  • 32. Click on the Grid tab.
  • 33. Set Column to "15", Row to "1", and Width and Height to "4"

Inner Rage

  • 34. On the left select Icon3. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 35. Select the Behavior tab.
  • 36. Under Categories select "Warrior | Arms"
  • 37. Under Templates select "Inner Rage"
  • 38. Click on the General Tab.
  • 39. Set Label to "Inner Rage" and hit "Okay".
  • 40. Click on the Grid tab.
  • 41. Set Column to "4", Row to "4", and Width and Height to "3"

Heroic Strike

  • 42. On the left select Icon4. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 43. Select the Behavior tab.
  • 44. Under Categories select "Warrior | Arms"
  • 45. Under Templates select "Heroic Strike"
  • 46. Click on the General Tab.
  • 47. Set Label to "Heroic Strike" and hit "Okay".
  • 48. Click on the Grid tab.
  • 49. Set Column to "4", Row to "1", and Width and Height to "3"

Deadly Calm

  • 50. On the left select Icon5. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 51. Select the Behavior tab.
  • 52. Under Categories select "Warrior | Arms"
  • 53. Under Templates select "Deadly Calm"
  • 54. Click on the General Tab.
  • 55. Set Label to "Deadly Calm" and hit "Okay".
  • 56. Click on the Grid tab.
  • 57. Set Column to "1", Row to "1", and Width and Height to "3"

Recklessness

  • 58. On the left select Icon6. It should be preset to have Select Grid set to "Warrior - Arms" and Use skin from Grid.
  • 59. Select the Behavior tab.
  • 60. Under Categories select "Warrior"
  • 61. Under Templates select "Recklessness"
  • 62. Click on the General Tab.
  • 63. Set Label to "Recklessness" and hit "Okay".
  • 64. Click on the Grid tab.
  • 65. Set Column to "1", Row to "4", and Width and Height to "3"

NOTE: you can make your own icons to track cooldowns not included in this module. Just make an icon as I've outlined about, place it in your grid (you might have to extend the grid or make a new grid), and for behavior put: return IconSpell("ability name")

Also, there are lots of other icons available. Check the behavior dropdown to see them.

Now click on a viable target, like a test dummy or your least favorite raid boss. Remember, the Heroic Strike icon will only appear when certain criteria is met. So start hacking away at something and you'll eventually see it pop up.

By now you probably have the hang of it. clcInfo is extremely flexible. You can track your rage, trinkets, internal cooldowns, and even create animations with sounds to grab your attention. Good luck and enjoy!