HealBot

• HealBot allows for 20 key mouse combinations to cast any beneficial spells.
• HealBot allows for 20 key mouse combinations to cast on disabled bars.
• Any usable item can be added to all combos.
• Any existing macro can be added to all combos.
• Target, Focus and Assist can be added to all combos
• Auto Target and Auto Trinket can be individually set on all combos
• HealBot can track and display who has aggro
• HealBot can be used for decursive functions
• HealBot can be used for monitoring buffs and buffing
• HealBots appearance can be configured and preferred appearances can be saved as skins.
• HealBot can show self/party/tanks/checked targets/extras/pets in a raid, extras can be filtered and sorted.
• HealBot usues libHealComm to sync incoming heals.
• HealBot has a built in res monitor
• HealBot has a SmartCast out of combat option, this will cast a spell in the following order..

1. res
2. decurse
3. buff
4. heal
5. user setting

Slash Commands

• /hb h - display help
• /hb o - toggles options
• /hb d - Reset options to default
• /hb ui - Reload UI
• /hb ri - Reset HealBot
• /hb rc - Reset custom debuffs
• /hb rs - Reset skins to defaults
• /hb cb - Clear BlackList
• /hb t - Toggle Healbot between disabled and enabled
• /hb disable - Disable Healbot
• /hb enable - Enable Healbot
• /hb skin <skinName> - Switch Skins
• /hb info - display versions of Healbot in party/raid
• /hb show - reset the position of the bars to the center

Installing and Updating

1. Completely log off WoW
2. Copy the folders into your WoW Addons folder.
3. Logon to WoW on your main Healer.
4. As a priority you should open the options and configure spells, cures and buffs.

Updating Troubles

If you get nil errors after updating.

1. Completely log off WoW
2. Run the .BAT file in the Healbot addon folder, this clears old saved Healbot settings from your WTF folder.
3. Logon to WoW on your main Healer.
4. As a priority you should open the options and configure spells, cures and buffs.

The download contains the following folders

• Healbot - This is the main addon
• SharedMedia - This addon is designed to be used by addons, it gives additional textures, fonts and sounds. This addon is recommended.
• SharedMediaAdditionalFonts - This addon can be used with SharedMedia to gives additional fonts. This addon is recommended.
• FuBar_HBskinFu - This is a plugin for the fuBar addon, FuBar_HBskinFu is an optional plugin for people who use fuBar.
• TitanHealBot - This is a plugin for the Titan bar addon, TitanHealBot is an optional plugin for people who use Titan.

Bug Reports

Bug Reports Go Here

Before reporting bugs

• Make sure you have the latest version
• Run HealBot_Clean_WTF.bat in the addon directory (sets healbot to Defaults.)

Performance related issues.

To identify CPU usage of all your addons.

• Open Options and on the general tab enable "Use CPU Profiler"
• Go to a BG or similar, allow the profiler to run for at least 10mins.
• Open Options and click the Info button, it will show CPU/MEM/Comms usage for all addons.

Note: Using the CPU Profiler is CPU intensive, you might experience a drop in fps. Be sure to turn it off when done.

HealBot Main site

Up to date information and main HealBot site

Please post feedback Here

Available on the site:

• Interactive FAQ
• Forum
• Wiki
• Polls
• Downloads
• Videos

Options Guide

A graphical guide to Healbot options can be found in the addon's Docs directory. The most up to date guide is here

YouTube Videos

HealBot Continued channel

Plugins

Titan Panel Users

A Titan plugin is included in the distribution

Fubar Users

A Fubar Plugin is included in the distribution

Frequently Asked Questions

Questions

1. Can I use HealBot with none healing classes.

2. Can the bars be sorted and only show those most needing heals and allow key/mouse combos to heal.

3. Will a future version of HealBot have a SmartCast feature while in combat.

4. Can I hide the incoming heals estimator.

5. Can I hide all the bars and only show those needing a debuff removed.

6. Can HealBot be sorted by groups, for example have 2 Groups per column.

7. I have a slow PC, are there any options I should set?

8. I can't see when people are out of range, how do I fix this?

9. What is the UI in some screenshots?

Answers

1: Can I use HealBot with none healing classes.

• Yes

2: Can the bars be sorted and only show those most needing heals and allow key/mouse combos to heal.

• Not possible in WoW 2.x

3: Will a future version of HealBot have a SmartCast feature while in combat.

• Not possible in WoW 2.x

4: Can I hide the incoming heals estimator.

• Yes.
• On the Skins tab, reduce the incoming heals opacity.

5: Can I hide all the bars and only show those needing a debuff removed.

• Yes.
• On the Healing tab, set the Alert Level to 0.
• On the Skins tab, set the Disabled opacity to 0, then click on the bar Disabled and set the Disabled text opacity to 0 (far right slider in colour picker), then same for the Background and Border.

6: Can HealBot be sorted by groups, for example have 2 Groups per column.

• From 2.0, yes.
• On the Skins tab, switch on Show Headers and then set the Number of Headers(Groups) per column.

7: I have a slow PC, are there any options I should set?

• Yes, the following options will have HealBot running lite.
• On the General tab: turn off Close Automatically.
• On the Healing tab: turn off Targets, set Alert Level to 75% or lower.
• On the Healing tab: set Range Check Frequency to 0.4sec or higher.
• On the Healing tab: Show extra bars for specific classes your responsible for healing.
• On the Buffs tab: turn off also in combat
• Turn off the Aggro Monitor
• Turn off Fluid Bars

8: I can't see when people are out of range, how do I fix this?

• On the skins tab, change the disabled bar opacity, to change the text opacity click on the bar labeled Disabled.

9. What is the UI in some screenshots?

• http://www.spartanui.com/

Quick Guide

This Is now very OUT OF DATE.

More Up to date guide available Here

Pre defined combos

• Ctrl+Alt+Left: This Enables or Disables (default) the bar, use this if you always want focus on certain targets.
• Ctrl+Alt+Middle: This adds the name on the bar to the BlackList, a use for this might be to BlackList imps. Note to clear the blacklist: ResetHB or ReloadUI or type /hb cb
• Ctrl+Alt+Right: Adds/Removes the target to your targets list.

General tab

• Disable HealBot: Disabled all events and hides the bars
• Show Minimap Button: Show button on minimap, hold right mouse button to move
• Lock position: Locks the frame
• Grow upwards: Frame anchors at the bottom and grows up as bars are added
• Close automatically: Closes the frame when no one needs a buff added/debuff removed/heal and only when out of combat
• Play sound on open: Plays a sound when the frame is opened.
• Hide options button: Hides the options button on the frame.
• Right click on panel opens options: Right click on edges will open the options.
• Hide Party Frames: Hide the standard party frames - Including Player optional
• Monitor Aggro: Track everyone with aggro allowing you to be a proactive healer, bar will enable for all in range with aggro
• Use Fluid Bars: Update the bars in a fluid motion - Only use this option if the update is fast and smooth.
• Chat Options: send a message when casting.

Spells tab

• Set spells for: select Enabled bars at all times (which includes at all times in combat) or Disabled bars when out of combat.
• Button: select the button for binding a spell to that button.
• Click/Shift/Ctrl/Alt: Enter the spell in here to bind. Note: any item can also be entered, also Target/Assist/Focus can be entered.
• Use Enabled Settings when Target in Combat: If your out of combat and the target is in combat, the enabled (combat) setting is used
• Always use Enabled Settings: Always use Enabled (Combat) Settings
• Avoid accidental PVP flagging: Keep bars disabled if the target is PVP flagged and your not
• SmartCast: Use this to automatically select a spell when out of combat, this binds to the left click. The types of spells can also be enabled/disabled, for example Druids might want to turn off res.

Healing tab

• Self: Show a bar for yourself
• Group: Show bars for your group.
• Tanks: Show bars for the tanks
• Target: Show bars for members you target, note up to 10 raid members can be checked.
• Extra: Show bars for any raid members not selected from the above, extras can be filtered on this tab.
• Pets: Show bars for any pets in your party/raid
• Alter level: Highlight the bars and text when a members health drops below this level.
• Range Check Frequency: How often range checking is performed on enabled bars - if *Monitor Aggro is enabled, this will alternate with a Range Check at this frequency.
• Sorting and Filtering: this is for extra bars.
• Configure classes for: Set classes for class types Melee/Ranged/Healers/Custom. Note these types can be used with filtering extra bars, monitoring debuffs and buffs.

Cure tab

• Monitor to remove debuffs and in combat: set these options to monitor.
• Spell to debuff: set the spell you would use, ie. Remove Curse would monitor for Curse. *Note. these are the spells SmartCast will use, to use a spell in combat you must set it on the spells tab, by default Alt+Left and Alt+Right will have a spell set.
• Ignore Debuff: Options to ignore specific debuffs, see below.
• Health bar colours: Change the members bar to this colour when affected by a debuff. The colour can be changed by clicking on the bar.
• Debuff Warnings: options for giving warnings when a members has been affected by a debuff.

• Ignore Debuffs options: - Irrelevant by class: Debuffs should as mana effect on warriors/rogues. - Non harmful effect: Debuffs which do no harm, such as Hunter's mark. - Short duration: Debuffs which only last for a few seconds. - Slow movement effect: Debuffs which only effect movement speed.

Skins tab

• Lots of options here, best to simply play around with them. Things to note are:
• If you find an appearance you like, give it a name and save the skin.
• Set the number of columns to 0, this sorts bars by headers.
• Everything on this tab does something, click on the bars for colour options.

Tips tab

• Show Tooltips: shows a tooltip with usable spell/item
• Show target information: shows information about the target, name/class/health and if needing a buff or affected by a debuff.
• Show detailed spell information: show details for spells including bonuses.
• Show instant cast recommendation: shows if the target would benefit from spells such as shield and HoT's
• Position tooltip: set where the tooltip is displayed
• Bar Information options: show information on the bar such as class/health as a delta or %/set text to class colour.
• Show HoT icons: Allows you to track your own Hots

Buff tab

• Monitor for buffs and in combat: set to monitor for buffs, recommend not setting in combat.
• Spell to buff: set the spell to monitor for, note in cases like MotW and GotW only MotW is an option but both buffs are treated the same. note SmartCast will use the buff set, if for example a Paladin wanted to use a greater blessing then set it on the spells tab.
• Check Members: set to monitor members in your group or the raid (includes group) or a certain class or just yourself.
• Bar Colours: click on the bar to set the colour you want when members of your party/raid are in need of a buff, their bar colour will change to the setting on the buff tab.

Defaults

• Click this to set defaults, note any extra saved skins will be lost.

Macro examples

Available in the readme.html file and Here