Latest Simple Threat Meter Files

STM 3.2.0

no-reply@curseforge.com (LCAmethyst) — Thu, 06 Aug 2009 11:52:22 +0000

SIMPLE THREAT METER

================================================================================
Version 3.2.0
================================================================================
Update for patch 3.2

================================================================================
Version 3.1.3b
================================================================================
CHANGE: Fixed the issue with the background not switching to Horizontal mode.

================================================================================
Version 3.1.3a
================================================================================
CHANGE: Reduced the MINIMUM thickness allowed for the bar to a value of 10.
ADDED : Ability to configure borders on the bar.
ADDED : Optional color phasing.
TO-DO : Configurable warning triggers
TO-DO : Support for temporary threat suspension, such as mages using mirror
image.

================================================================================
Version 3.1.3
================================================================================
Fixed that problem where the position didn't seem to save correctly. It occurred if you were running a viewport mod that offset the bottom edge of the playable area. :)

================================================================================
Version 3.1.2
================================================================================
Added the option to display Absolute Threat defecit (ie. the value of how much threat is needed to pull aggro).
Optimised some calculations for better performance.

================================================================================
Version 3.10.a
================================================================================
Complete re-write for WotLK patch 3.x
Now uses Blizzard built-in threat functions.

================================================================================
Version 2.4.3.d
================================================================================
FIXED : Minor update issues.

================================================================================
Version 2.4.3.c
================================================================================
FIXED : Threat was sometimes displaying to many decimal places. Looked messy.
CHANGE: Threat difference now displays a shortened value when over 1,000 threat.
ADDED : The PLAYER_TARGET_CHANGED event now triggers an update also.

================================================================================
Version 2.4.3.b
================================================================================
CHANGE: Now uses the updated version of libBars-1.0 supporting orientation.
CHANGE: Height and Width renamed to LENGTH and THICKNESS.
CHANGE: Text removed from the threat bar itself to a display outside the bars.
ADDED : Option to switch orientation between horizontal & vertical.
ADDED : "Reset Position" option to the config screen.
ADDED : Text now displays -AGGRO- when your target is targetting you.
ADDED : Option to display the "threat differential" as well as or instead of %.
ADDED : Option to colour the threat text as a warning, based upon a configurable
   threshold level.
TODO  : Option to select font using sharedmedia.
TODO  : Option to automatically switch off when in a battleground.

================================================================================
Version 2.4.3.a
================================================================================
FIXED : Issue where the selected texture wasn't saving correctly.
CHANGE: Settings are now saved on a per character basis.
CHANGE: Layout of config page to make better use of space.
ADDED : Option in config panel to switch off displaying the tank bar.
ADDED : "Disable when solo" option.
ADDED : version tag to TOC. I'm using an alpha character appended to the
Blizzard release version.

================================================================================
Version 20400
================================================================================
Initial release version.

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 3.1.3.b

no-reply@curseforge.com (LCAmethyst) — Mon, 20 Jul 2009 10:16:27 +0000

SIMPLE THREAT METER

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 3.1.3.a

no-reply@curseforge.com (LCAmethyst) — Sun, 19 Jul 2009 13:21:03 +0000

SIMPLE THREAT METER
================================================================================
Version 3.1.3a
================================================================================
CHANGE: Reduced the MINIMUM thickness allowed for the bar to a value of 10.
ADDED : Ability to configure borders on the bar.
ADDED : Optional color phasing.
TO-DO : Configurable warning triggers
TO-DO : Support for temporary threat suspension, such as mages using mirror
image.

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

STM 3.1.3

no-reply@curseforge.com (LCAmethyst) — Sun, 07 Jun 2009 17:43:41 +0000

SIMPLE THREAT METER
================================================================================
Version 3.1.3
================================================================================
Fixed that problem where the position didn't seem to save correctly. It occurred if you were running a viewport mod that offset the bottom edge of the playable area. :)

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 3.1.2

no-reply@curseforge.com (LCAmethyst) — Sat, 23 May 2009 22:04:42 +0000

SIMPLE THREAT METER
================================================================================
Version 3.1.2
================================================================================
Added the option to display Absolute Threat defecit (ie. the value of how much threat is needed to pull aggro).
Optimised some calculations for better performance.

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 3.10.a

no-reply@curseforge.com (LCAmethyst) — Mon, 13 Apr 2009 07:45:40 +0000

SIMPLE THREAT METER
================================================================================
Version 3.10.a
================================================================================
Complete re-write for WotLK patch 3.x
Now uses Blizzard built-in threat functions.

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 2.4.3 d

no-reply@curseforge.com (LCAmethyst) — Sun, 07 Sep 2008 12:30:10 +0000

SIMPLE THREAT METER

To open the configuration panel, type the command: /stm Additionally, if you
have the mod unlocked, you can access the options screen by right-clicking on
the drag bar.

The configuration options themselves should be fairly clear. Click on the
"Show test" button to see what the threat bars will look like in use, with the
options you have configured.

The threat bars only display in combat (you don't need them outside combat, so
why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way
and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 2.4.3 c

no-reply@curseforge.com (LCAmethyst) — Sat, 06 Sep 2008 01:06:18 +0000

SIMPLE THREAT METER

====================================================================

Version 2.4.3.c

====================================================================

FIXED : Threat was sometimes displaying to many decimal places. Looked messy. CHANGE: Threat difference now displays a shortened value when over 1,000 threat. ADDED : The PLAYER_TARGET_CHANGED event now triggers an update also.

====================================================================

Version 2.4.3.b

====================================================================

CHANGE: Now uses the updated version of libBars-1.0 supporting orientation. CHANGE: Height and Width renamed to LENGTH and THICKNESS. CHANGE: Text removed from the threat bar itself to a display outside the bars. ADDED : Option to switch orientation between horizontal & vertical. ADDED : "Reset Position" option to the config screen. ADDED : Text now displays -AGGRO- when your target is targetting you. ADDED : Option to display the "threat differential" as well as or instead of %. ADDED : Option to colour the threat text as a warning, based upon a configurable

       threshold level.

TODO : Option to select font using sharedmedia. TODO : Option to automatically switch off when in a battleground.

====================================================================

Version 2.4.3.a

====================================================================

FIXED : Issue where the selected texture wasn't saving correctly. CHANGE: Settings are now saved on a per character basis. CHANGE: Layout of config page to make better use of space. ADDED : Option in config panel to switch off displaying the tank bar. ADDED : "Disable when solo" option. ADDED : version tag to TOC. I'm using an alpha character appended to the

       Blizzard release version.

====================================================================

Version 20400

====================================================================

Initial release version.

To open the configuration panel, type the command: /stm Additionally, if you have the mod unlocked, you can access the options screen by right-clicking on the drag bar.

The configuration options themselves should be fairly clear. Click on the "Show test" button to see what the threat bars will look like in use, with the options you have configured.

The threat bars only display in combat (you don't need them outside combat, so why leave them there?) though you can show test bars using the config panel.

The threat bars are also click-through, meaning that they don't get in the way and stop you clicking on targets.

Lastly, you can configure a transparency level, so you can see through the bars.

Simple Threat Meter 2.4.3 b

no-reply@curseforge.com (LCAmethyst) — Wed, 27 Aug 2008 14:12:13 +0000

====================================================================

Version 2.4.3.b

====================================================================

       threshold level.

TODO : Option to select font using sharedmedia. TODO : Option to automatically switch off when in a battleground.

Simple Threat Meter 2.4.3 a

no-reply@curseforge.com (LCAmethyst) — Sat, 23 Aug 2008 11:31:54 +0000

FIXED : Issue where the selected texture wasn't saving correctly.
CHANGE: Settings are now saved on a per character basis.
CHANGE: Layout of config page to make better use of space.
ADDED : Option in config panel to switch off displaying the tank bar.
ADDED : "Disable when solo" option.
ADDED : version tag to TOC. I'm using an alpha character appended to the Blizzard release version.

Simple Threat Meter 2.4.3

no-reply@curseforge.com (LCAmethyst) — Sat, 16 Aug 2008 13:06:22 +0000

First release version.